AIRCRAFT ELECTRICIAN

Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. NEW MEXICO AIR NATIONAL GUARD NATIONWIDE. All members of the New Mexico Air National Guard or current Active Duty/Reserve military members eligible and wiling to become members of the New Mexico Air National Guard **This is an indefinite position** This National Guard position is for a AIRCRAFT ELECTRICIAN, Position Description Number D1549P01 and is part of the NM 150th SOW Maintenance Group, National Guard.

Duties

The position functions to analyze malfunctions, troubleshoot, remove, install, repair, modify, maintain, test, align, calibrate and certify the components of the aircraft electrical system the electronically and pneumatically controlled environmental system, and associated test equipment, and to certify these systems are air worthy, by intensive inspections of the Electrical/Electronic and Environmental System and peripherals. Performs functional tests, analyzes performance and troubleshoots the electronic, electrical, hydraulic, pneumatic and mechanical functions of the subsystems integrated into the digital brake/antiskid system, maintenance annunciation panel (MAP) system of the integrated main generator, standby generator, emergency generator, flight control power, ACIDC power distribution and sub-systems integrated into the electronic/electrical and environmental systems. Interprets analog and digital operational and output characteristics and results from the Maintenance Annunciation Panel (MAP), onboard computers, aircrew debriefings and specialized test equipment. The electrical system includes the electrical power generation and distribution system, the fire detection and extinguishing system, the ice and rain protection system, the landing gear system, the interior and exterior lighting system, the oxygen generation and distribution system, and the auxiliary power system. The environmental system includes compression, distribution, pressurization, heating, cooling, temperature control, moisture/air contamination control, and liquid cooling requirements. Removes, repairs, calibrates, installs, aligns, inspects, and conducts operational performance checkouts on the components of the electronic/electrical and environmental systems. Analyzes malfunctions using schematics, logic and wiring diagrams, computer data, and factory drawings. Diagnoses circuit operating characteristics using on-board computer, special test equipment and laptop computers to isolates problems to the failing component. Removes and replaces components or assemblies down to the lowest level authorized by depot. Performs organizational and intermediate level maintenance modifications as required. Performs recurring inspections and system tests of the life support and the electronic/electrical and environmental system to certify aircraft are ready for flight. Modifies and updates electrical and environmental support equipment according to applicable technical publications. Maintains and operates various types of test equipment such as oscilloscopes, diagnostic computers, digital and analog multi-meters, constant speed drive test stands, voltmeters, ammeters, etc. Provides technical guidance, advice and/or assistance to other work centers on the interrelationship of electronic/electrical and environmental systems and their respective system, to include flight controls, offensive fire control radar, weapon release, communications, hydraulic, fuel, engine and egress. Processes and accounts for supply assets in the repairable processing system to maintain aircraft records, inspection records, and equipment maintenance in computer systems (CAMS). Documents maintenance actions and man-hour expenditures on maintenance forms and computer systems. Clears Red X symbols on maintenance forms as authorized, and performs electronic/electrical and environmental system debriefing of aircrews. Recommends methods (AFTO Form 22) to improve equipment performance and maintenance procedures, i.e., data corrections to correct software or technical order deficiencies. Inspects, tests and performs operative maintenance on cryogenic and gaseous oxygen and nitrogen servicing equipment. Is able to provide a thorough inspection of the complete electronic/electrical and environmental, and other systems, of the aircraft during special and phase inspections. Prepares for and participates in various types of readiness evaluations such as Operational Readiness inspections (ORI), Inspector General (IG) inspections, Unit Effectiveness Inspections and mobility and command support exercises. Complies with safety, fire, security, and housekeeping regulations. Ensures that material, equipment and components are properly stored, protected and maintained. Performs other duties as assigned.

Qualifications

Military Grades: Enlisted (E-6 and below) Compatible Military Assignments: AFSC: Must hold a 2A6X6 AFSC or be eligible to cross train. SPECIALIZED EXPERIENCE: WG-05- Must possess experience or training which has provided a knowledge and skill in locating and tying in the electrical systems with the aircraft armament, electronics, and instrument systems; adjusting and calibrating the components of the various electrical systems; reading and interpreting blueprints, wiring diagrams and schematics WG-08- Must possess experience or training in installing, maintaining and repairing aircraft electrical systems. Experience which demonstrates the ability to diagnose and determine repairs. Experience in the use of common hand tools and measuring equipment. Experience which provided ability to lay out, set up and perform operations dependent on electrical and electronic theory and instruments WG-11- Must possess experience or training installing, maintaining, repairing and modifying electrical systems and major substation components of electrical system. Experience diagnosing malfunctions and determining remedy when complex relationships exists among different electrical system circuits requiring knowledge of all electrical units and systems. Experience making electrical repairs that require the use of precision measuring equipment and common hand tools. Experience in the setup and operation of computerized multiple circuit analyzing equipment in manual, semiautomatic, or automatic mode to run existing and new (not fully debugged) diagnostic programs to test and analyze aircraft electrical circuitry and interconnecting cabling of systems such as navigational computers, radar, and related equipment and to repair discrepancies

Evaluations

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

How to apply To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13090130 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Other information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). PROBATIONARY PERIOD: As a condition of employment for accepting this position, you will be required to serve a 2-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: - your performance and conduct; - the needs and interests of the agency; - whether your continued employment would advance organizational goals of the agency or the Government; and - whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.