TITLE 32 ELECTRONICS TECHNICIAN (MI CRTC)

Summary

THIS IS AN AIR FORCE NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a TITLE 32 ELECTRONICS TECHNICIAN (MI CRTC), Position Description Number NGD1878000 and is part of the MI Alpena CRTC, Michigan Air National Guard. MICHIGAN AIR NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a Michigan Air National Guard recruiter prior to applying for this position.

Duties

This vacancy may qualify for a Recruitment Incentive up to 25% of the basic salary rate. ***THIS IS A TITLE 32 NATIONAL GUARD POISITION THAT REQUIRES MILITARY MEMBERSHIP*** This position is located at an Air National Guard (ANG) Aviation Wing, Air Traffic Control (ATC) Squadron, Airfield Systems Flight. The purpose of the position is to provide technical expertise to maintain and certify Air traffic Control and Landing Systems (ATCALS). This includes performing investigation, analysis, diagnosis, testing, tuning, correction, optimization, alignment, and verification/certification to ensure continuous and reliable operation of air traffic control and landing and communication systems. 1. Certifies assigned systems and sub-systems to ensure compliance with USAF and Federal Aviation Administration (FAA) established standards and safety requirements. ATCALS cannot be used unless certified by the employee. 2. Determines when equipment malfunctions warrant shutdown of various systems. Acts as expert technical consultant to determine whether systems are operationally acceptable and safe within the prescribed standards and tolerances for air traffic control and air navigation. 3. Provides technical guidance, training, and assistance to other technicians and conducts on-the-job (OJT) training to apprentices in all phases of work. Conducts and documents OJT in all phases of equipment maintenance. Certifies task qualifications and schedules task training. 4. Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment. Uses and assures proper fit of required safety equipment and clothing. The above duty description doesn't contain all details of the official position description.

Qualifications

Qualifications are based on breadth/level of experience. In addition to describing duties performed, applicants must provide the dates of each period of employment (from MM/YYYY to MM/YYYY) and the number of hours worked per week. As qualification determinations cannot be made when resumes do not include the required information, failure to provide this information may result in disqualification. Applicants are encouraged to use the USAJOBS Resume Builder to develop their federal resume. For additional information see: What to include in your resume. NOTE: All job seekers will be required to limit their resumes to 2 pages in length when applying for job opportunity announcements (JOAs) MILITARY GRADE: E1-E6 Selectee(s) must be within the military grade(s) listed in this job announcement prior to the effective date of placement into the technician position to ensure to avoid grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO. GENERAL EXPERIENCE: Experience, education or training performing simple mechanical installations and adjustments. Experience which demonstrates the applicant's ability to recognize obvious malfunctions. A good understanding of basic electronic theories and techniques and familiarity with standard electronic components and their use. Tracing circuitry, diagnosing malfunctions and adjusting controls to achieve peak performance. Experience using specific layout and schematic diagrams to construct and package simple devices and subunits of equipment such as power supplies, oscillators, amplifiers, etc. Using advanced methods in a full-range of troubleshooting procedures, techniques, and usage of test-set related equipment. Experience using common hand tools. Experience that demonstrates the ability to follow written instructions. SPECIALIZED EXPERIENCE: GS-11 and above - must have 1-year equivalent to at least next lower grade level experience, education, or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications. Work as a technician, instructor, inspector, or mechanic (civilian or military) that showed progression in theoretical and practical knowledge of electronic theory, and of the characteristics, function, operation, and capabilities of a variety of types of electronic equipment. This experience must have included the use of schematic diagrams, a variety of test equipment, and the application of appropriate electronic formulas involved in such duties as testing, troubleshooting, modifying, designing, calibrating, installing, maintaining, repairing, constructing, developing, and instructing on electronic equipment, or similar functions. Experience in developing policies, standards, and procedures for maintenance, installation, or similar functions, provided the work clearly shows that the applicant applied a specialized knowledge of the theories and principles of a variety of electronic systems or equipment. QUALITY OF EXPERIENCE: Length of time is not of itself qualifying. Candidates' experience should be evaluated on the basis of duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience, training, and education must show possession of the knowledge, skills, and abilities needed to fully perform the duties of the position to be filled.

Evaluations

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. You may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. WHO MY APPLY: AREA 1: Current permanent (Tenure 1 and 2) Federal Technicians/Employees of the Michigan National Guard and current temporary (Tenure 3 and 0) Federal Technicians/Employees of the Michigan National Guard who've held a temporary appointment with the Michigan National Guard for an accumulative 6 months within the last 12 months. AREA 2: All current military members of the Michigan National Guard. If the applicant is a member of the other service branch they MUST willing and eligible to immediately transfer to the appropriate branch of service. AREA 3: All applicants who are willing and eligible to immediately enlist to the appropriate branch of the Michigan National Guard and will contact a recruiter. IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please follow all instructions carefully. Errors or omissions may affect your eligibility. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid work on the same basis as for paid experience. Part-time experience will be credited on the basis of time actually spent in appropriate activities. To receive credit for such experience you must indicate clearly the nature of the duties and responsibilities in each position held and the number of hours per week spent in such employment. Your qualifications will be evaluated on the above general and specialized experience, to include following competencies- knowledge, skills, abilities (KSAs): Ability to Do the Work of the Position without More Than Normal Supervision Ability to Plan and Organize Work Electrical Technical Credibility Troubleshooting (Electronic Equipment)

How to apply To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13054540 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Other information SELECTIVE SERVICE: If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). MILITARY MEMBERS WITH BONUSES: Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period). Are advised to meet with education specialist to review contract. NOTE: If the individual selected is currently on a Title 10 or Title 32 tour no action can be taken until he/she is released from tour.